Initial check-in

Source/Program/InstrumentConfigFile/STE_POWER_SUPPLY_SYSTEM.ini

@@ -0,0 +1,59 @@
+[GENERAL]
+ETHERNET_ADDRESS = localhost
+ETHERNET_PORT = 5025
+MODULE_DEFINITION = UUT_REF_3_3V, STE_PVM_5V, STE_GU_INTERFACE_RELAYS_25V, STE_GU_INTERFACE_RF_INTERFACE_5V
+; 0 means no coupled modules.
+; couple means turning on/off any one of the module, turns on/off the others
+COUPLED_MODULES = STE_PVM_5V, STE_GU_INTERFACE_RELAYS_25V, STE_GU_INTERFACE_RF_INTERFACE_5V
+; 0 means no grouped modules.
+; group means turning combining 2 or more modules thus acting as one module
+GROUPED_MODULES = 0
+INTERFACE = ETHERNET
+
+; GU | KW | KWSIM | SELFTEST | ZERO VOLTAGE
+[UUT_REF_3_3V]
+INDEX = 1
+OCP = 2.0
+OVP = 4.0
+VOLTAGE_SETPOINT = 3.3
+
+MIN_VOLTAGE = 3.0
+MAX_VOLTAGE = 3.75
+MAX_CURRENT = 2.0
+MIN_CURRENT = -0.25
+
+[STE_PVM_5V]
+INDEX = 2
+OCP = 2.0
+OVP = 8.0
+VOLTAGE_SETPOINT = 5.0
+
+; STE Power (PVM and peripherals) supply settings
+MIN_VOLTAGE = 4.0
+MAX_VOLTAGE = 5.5
+MAX_CURRENT = 1.5
+MIN_CURRENT = -.25
+
+[STE_GU_INTERFACE_RELAYS_25V]
+INDEX = 3
+OCP = 3.0
+OVP = 34.0
+VOLTAGE_SETPOINT = 25.0
+
+; STE Power (GU interface and Relays) Supply settings
+MIN_VOLTAGE = 22.0
+MAX_VOLTAGE = 30.0
+MAX_CURRENT = 3.0
+MIN_CURRENT = -0.25
+
+[STE_GU_INTERFACE_RF_INTERFACE_5V]
+INDEX = 4
+OCP = 5.0
+OVP = 6.5
+VOLTAGE_SETPOINT = 5.0
+
+; STE Power (PVM and peripherals) supply settings
+MIN_VOLTAGE = 4.0
+MAX_VOLTAGE = 6.3
+MAX_CURRENT = 4.5
+MIN_CURRENT = -.25