Big changes

Source/TSRealLib/HAL/Interfaces/ICommDevice/ICommDevice.cs

@@ -0,0 +1,79 @@
+// ******************************************************************************************
+// **                                                                                       **
+// **      RAYTHEON PROPRIETARY: THIS DOCUMENT CONTAINS DATA OR INFORMATION                 **
+// **      PROPRIETARY TO RAYTHEON COMPANY AND IS RESTRICTED TO USE ONLY BY PERSONS         **
+// **      AUTHORIZED BY RAYTHEON COMPANY IN WRITING TO USE IT.DISCLOSURE TO                **
+// **      UNAUTHORIZED PERSONS WOULD LIKELY CAUSE SUBSTANTIAL COMPETITIVE HARM TO          **
+// **      RAYTHEON COMPANY'S BUSINESS POSITION. NEITHER SAID DOCUMENT NOR ITS              **
+// **      CONTENTS SHALL BE FURNISHED OR DISCLOSED TO OR COPIED OR USED BY PERSONS         **
+// **      OUTSIDE RAYTHEON COMPANY WITHOUT THE EXPRESS WRITTEN APPROVAL OF RAYTHEON        **
+// **      COMPANY.                                                                         **
+// **                                                                                       **
+// **      THIS PROPRIETARY NOTICE IS NOT APPLICABLE IF DELIVERED TO THE U.S.               **
+// **      GOVERNMENT.                                                                      **
+// **                                                                                       **
+// **      UNPUBLISHED WORK - COPYRIGHT RAYTHEON COMPANY.                                   **
+// **                                                                                       **
+// **      WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA AND / OR TECHNOLOGY WHOSE         **
+// **      EXPORT OR DISCLOSURE TO NON-U.S.PERSONS, WHEREVER LOCATED, IS RESTRICTED         **
+// **      BY THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR) (22 C.F.R.SECTION        **
+// **      120-130) OR THE EXPORT ADMINISTRATION REGULATIONS(EAR) (15 C.F.R.SECTION         **
+// **      730-774). THIS DOCUMENT CANNOT BE EXPORTED(E.G., PROVIDED TO A SUPPLIER          **
+// **      OUTSIDE OF THE UNITED STATES) OR DISCLOSED TO A NON-U.S.PERSON, WHEREVER         **
+// **      LOCATED, UNTIL A FINAL JURISDICTION AND CLASSIFICATION DETERMINATION HAS         **
+// **      BEEN COMPLETED AND APPROVED BY RAYTHEON, AND ANY REQUIRED U.S.GOVERNMENT         **
+// **      APPROVALS HAVE BEEN OBTAINED. VIOLATIONS ARE SUBJECT TO SEVERE CRIMINAL          **
+// **      PENALTIES.                                                                       **
+// **                                                                                       **
+// **      CAPITAL EQUIPMENT/SOFTWARE: THIS TECHNICAL DATA WAS DEVELOPED OR ACQUIRED        **
+// **      EXCLUSIVELY AT CONTRACTOR EXPENSE AND IS INTENDED FOR USE ON MULTIPLE            **
+// **      PROJECTS/PROGRAMS.                                                               **
+// **                                                                                       **
+// *******************************************************************************************
+
+using Raytheon.Communication;
+
+namespace Raytheon.Instruments
+{
+    /// <summary>
+    /// An interface to any device that you can write and read to/from
+    /// </summary>
+    public interface ICommDevice : IInstrument
+    {
+        /// <summary>
+        /// Close the communication interface
+        /// </summary>
+        [UmsCommand("ICommDevice.Close")]
+        void Close();
+
+        /// <summary>
+        /// Open the communication interface
+        /// </summary>
+        [UmsCommand("ICommDevice.Open")]
+        void Open();
+
+        /// <summary>
+        /// Reads data from a communication device
+        /// </summary>
+        /// <param name="dataRead"></param>
+        /// <returns>number of bytes read</returns>
+        [UmsCommand("ICommDevice.Read")]
+        uint Read(ref byte[] dataRead);
+
+        /// <summary>
+        /// Set the timeout on a read
+        /// </summary>
+        /// <param name="timeout"></param>
+        [UmsCommand("ICommDevice.SetReadTimeout")]
+        void SetReadTimeout(uint timeout);
+
+        /// <summary>
+        /// Writes data to a communication device
+        /// </summary>
+        /// <param name="data"></param>
+        /// <param name="numBytesToWrite"></param>
+        /// <returns>the number of bytes written</returns>
+        [UmsCommand("ICommDevice.Write")]
+        uint Write(byte[] data, uint numBytesToWrite);
+    }
+}

Source/TSRealLib/HAL/Interfaces/ICommDevice/ICommDevice.csproj

@@ -0,0 +1,19 @@
+<Project Sdk="Microsoft.NET.Sdk">
+   <Import Project="$(SolutionDir)Solution.props" />
+   <PropertyGroup>
+      <TargetFramework>net472</TargetFramework>
+      <AssemblyName>Raytheon.Instruments.CommDevice.Contracts</AssemblyName>
+      <Description>ICommDevice Instrument Interface</Description>
+      <Product>HAL</Product>
+
+      <!-- Static versioning (Suitable for Development) -->
+      <!-- Disable the line below for dynamic versioning -->
+      <Version>1.2.0</Version>
+   </PropertyGroup>
+
+   <ItemGroup>
+      <PackageReference Include="Raytheon.Instruments.Contracts" Version="1.*" />
+      <PackageReference Include="Raytheon.Common" Version="1.0.0" />
+   </ItemGroup>
+   
+</Project>