Big changes

Source/Program/InstrumentConfigFiles/KEYSIGHT_SCPI_DEF.ini

@@ -0,0 +1,56 @@
+[SYSTEM]
+;system commands
+CLEAR_CMD = *CLS
+RESET_CMD = *RST
+SELFTEST_CMD = *TST?
+READ_ERROR_CODE_CMD = SYST:ERR?
+REBOOT_CMD = SYST:REB
+
+;panel disable/enable commands
+SET_FRONTPANEL_DISABLE_CMD = SYST:COMM:RLST RWL
+SET_FRONTPANEL_ENABLE_CMD = SYST:COMM:RLST REM
+
+;watchdog commands
+SET_WATCHDOGDELAY_CMD = OUTP:PROT:WDOG:DEL
+SET_WATCHDOGON_CMD = OUTP:PROT:WDOG ON
+SET_WATCHDOGOFF_CMD = OUTP:PROT:WDOG OFF
+
+;coupling commands
+SET_COUPLE_CHANNELS_CMD = OUTP:COUP:CHAN
+SET_COUPLE_ON_CMD = OUTP:COUP ON
+SET_COUPLE_OUTPUT_PROTECT_ON_CMD = OUTP:PROT:COUP ON
+QUERY_COUPLE_CHANNELS = OUTP:COUP:CHAN?
+QUERY_COUPLE_STATE = OUTP:COUP?
+
+; Grouping Commands
+SET_GROUP_DEFINE_CMD = SYST:GRO:DEF
+UNGROUP_ALL_CHANNELS_CMD = SYST:GRO:DEL:ALL
+QUERY_GROUP_CHANNELS = SYST:GRO:CAT?
+
+[MODULE]
+; current commands
+SET_INRUSH_DELAY_CMD = CURR:PROT:DEL
+READ_INRUSH_DELAY_CMD = CURR:PROT:DEL?
+READ_CURRENT_CMD = MEAS:CURR?
+SET_OCP_CMD = CURR:LEV
+READ_OCP_CMD = CURR:LEV?
+SET_OCP_ON_CMD = CURR:PROT:STAT ON
+
+; voltage commands
+SET_OVP_CMD = VOLT:PROT
+SET_VOLTAGE_SLEW_CMD = VOLT:SLEW
+SET_VOLTAGE_SETPOINT_CMD = VOLT:LEV
+SET_CONSTANT_VOLTAGE_CMD = STAT:OPER:ENAB 1
+READ_VOLTAGE_CMD = MEAS:VOLT?
+READ_VOLTAGE_SETPOINT_CMD = VOLT?
+READ_OVP_CMD = VOLT:PROT?
+READ_VOLTAGE_SLEW_CMD = VOLT:SLEW?
+
+; set output commands
+SET_OUTPUT_DISABLE_CMD = OUTP OFF
+SET_OUTPUT_ENABLE_CMD = OUTP ON
+
+; query status
+READ_OUTPUT_STATUS_CMD = OUTP?
+READ_ERROR_STATUS_CMD = SYST:ERR?
+READ_PROTECTION_STATUS_CMD = STAT:QUES:COND?